Release contact reel

Fig 1: Identifying Removal Of Torx 20 Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove one screw (Torx 20).

Fig 2: Identifying Contact Reel Turned Counter-Clockwise Two Entire Turns

Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn the contact reel counter-clockwise to the end-position.

Fig 3: Identifying Contact Reel Turned Clockwise To Limit Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn the contact reel clockwise two complete revolutions. Then turn clockwise until the screw hole is in position "one o'clock" as shown.

NOTE:

On later car models, the yellow marking must also be visible in the window.