Install center console
Install the center console
Move the gear selector lever forward. Apply the parking brake.
Install the center console over the gear selector lever. Locate the parking brake lever in its socket.
Fold the bracket down.
Install the center console
Pull up the front edge of the bracket.
Secure it in its mountings. Tighten the screws to 10 Nm (7.4 lb. ft) .
Install the CD rack.
Remove the masking tape from the parking brake handle.
Adjust the parking brake
See Adjust the handbrake .
Install the panel for the parking brake lever
Install the panel and connector
Install the panel over the top panel for the boot. Press together.
Angle in the front edge of the panel. Press down the panel into the center console.
Reinstall connector on the ashtray panel.
Assemble the connector. Reinstall the panel in the center console.
Install the ashtray.
Reinstall the side panels
Locate the side panels in their mountings.
Press the panels forward to secure them properly.
Turn the locking screw 1/4 of a turn.