Connecting the breakout box

Fig 1: Identifying Breakout Box

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Remove the fuse
• Remove the driver information module (DIM)
• Disconnect the control module connector.

Connect adapter 9512901 to the control module connector. Connect breakout box 9511428 and wiring 9511499 to the adapter.

Alternatively, breakout box 9813190 can be connected to the adapter.

Disconnect the breakout box in reverse order.

Other information: 

• See Driver information module (DIM), replacing
• See Signal specification
• For information about the fuses, see the relevant wiring diagram.