Install the brake fluid reservoir

NOTE:

For tightening torques, see: Tightening torque .

Fig 1: Brake Fluid Reservoir From Master Cylinder

Courtesy of VOLVO CARS OF NORTH AMERICA.

Check that all connections are free of contaminants.

Lubricate the O-rings and any hoses with brake fluid or glycerin.

NOTE:

Do not use a soap solution or mineral oil to lubricate the hoses. Use brake fluid or glycerin.

Install:

the hose for the clutch cylinder. Remove the hose clip
the brake fluid reservoir from directly above
the screw on side of the brake fluid reservoir. Tighten. See: Tightening torque .