LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> V70 Base, 2.4 64 >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Drive Shaft Seal (Right), Turbocharger - Removal & Installation >> Engine >> Replacing The Wiring Harness / Oil Temperature Sensor >> Removal >> Preparations

Replacing The Wiring Harness / Oil Temperature Sensor: Removal: Preparations

Fig 1: Identifying Air Cleaner Housing
GLL105816Courtesy of VOLVO CARS OF NORTH AMERICA.

Switch off the ignition.

Removing the air cleaner (ACL) housing 

Remove the air cleaner housing ACL assembly with the intake pipe.

scientia non olet · About LEMON Manuals