LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> V70 Base, 2.4 64 >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Drive Shaft Seal (Right), Turbocharger - Removal & Installation >> Engine >> Replacing The Wiring Harness / Oil Temperature Sensor >> Removal >> Lifting The Car

Lifting The Car

Fig 1: Identifying Splash Guard Under The Engine
GLL109344Courtesy of VOLVO CARS OF NORTH AMERICA.
NOTE:

Position the front lift arms so that they do not obstruct the sub-frame support plates.

Remove: