Replacing Three-Way Catalytic Converter (TWC): Preparation
Remove
- the battery negative lead. First read Battery, disconnecting .
- the engine cover.
- the nuts for the exhaust pipe connection to the turbocharger (TC).
- the exhaust pipe. Move it to one side.
Raise the car and remove the splash guard from under the engine.
Remove
- the member holding the front edge of the three-way catalytic converter (TWC).
- the brake pipe from the member.
- the mountings for the three-way catalytic converter (TWC) on the member.NOTE:
Hang the heat deflector plate up with 2 screws.