Crankcase ventilation and electronic throttle module (ETM), cleaning: Removing: Notes

Remove: 

• the battery negative cable. Battery, disconnecting

• the auxiliaries belt. Use 9997109
• the inlet hose for inlet hose to the control module, if applicable.

Remove the oil dipstick pipe.

Remove: 

• the screw for the charge air pipe over the engine
• the clamp for the delivery pipe to the power steering pump from the intake manifold
• the charge air hose from the charge air cooler (CAC)
• the charge air pipe from the hose on the turbocharger (TC).

Remove the charge air pipe.