Calibrating the component

NOTE:

Calibration can only be performed if the vehicle is equipped with an occupant weight sensor (OWS).

Fig 1: Identifying Ignition Switch OFF Position

GLL101045

Courtesy of VOLVO CARS OF NORTH AMERICA.

Switch off the ignition. Wait 10 seconds
Ensure that the passenger seat is completely empty
Switch on the ignition. Wait 10 seconds.
CAUTION:
The passenger seat must be completely empty during calibration. If the passenger seat is not completely empty, the calibration will be incorrect, which will result in incorrect function of the SRS system.

Activate calibration of the occupant weight sensor (OWS) by clicking on the VCT2000 symbol.

Fig 2: Identifying VCT2000 Diagnostic Tool
Courtesy of VOLVO CARS OF NORTH AMERICA.