Installing the dashboard bracket and the hood catch

Fig 1: Hood Latch And Wiring

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the two connectors from the cable harness for the dashboard
• the blue and brown connectors from the dashboard cable harness
• the bracket and install the upper screw by hand
• the hood catch and the three screws. Tighten to 10 Nm 
• the cable from the hood catch
• the cable harness clips in the dashboard
• the screw for the dashboard in the bracket (A)
• The central electronic module (CEM) according to Replacing central electronic module (CEM) .