LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> S80 T-6 >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Intake And Exhaust System - Cleaning, Inspection And Adjustment >> Turbo Compressor (B6284T; 1999-2001) >> Pressure Regulator, Checking/Adjusting >> Checking / Setting Turbo1 Pressure Regulator >> Checking And Adjusting Push Rod

Checking And Adjusting Push Rod

Fig 1: Identifying Boost Pressure Control Valve Lever And Turbocharger Housing
GLL100930Courtesy of VOLVO CARS OF NORTH AMERICA.

Push the boost pressure control (BPC) valve lever towards the turbocharger (TC) housing. The boost pressure control (BPC) valve should be closed.

Check that the push rod locates on the lever lug.

If necessary, adjust the push rod until it locates.

NOTE:

The boost pressure control (BPC) valve spindle must be mounted on the lever when the lock-nut is adjusted.

The diaphragm in the pressure regulator will be damaged if the push rod is twisted.

scientia non olet · About LEMON Manuals