Motronic 4.4
Flywheel adaptation must be completed (status 'READY') TIP: Look in the Monitor Test Scroll List and find the entry 'F ADAP'. It will say either 'READY' or 'NOT READY'. If it says 'READY', continue. If it says 'NOT READY', see below.
Flywheel adaptation must be completed (status 'READY') TIP: Look in the Monitor Test Scroll List and find the entry 'F ADAP'. It will say either 'READY' or 'NOT READY'. If it says 'READY', continue. If it says 'NOT READY', see below.