Poly-V belt(mar), checking belt tension: Notes
- Alternator poly-V belt must be adjusted if value is greater than 0.41 in
. Apply a force of 22.5 lbf
.
To adjust, first release the tension pulley and then continue with Adjusting belt tension, poly-V belt alternator
- The poly-V belt to the power steering and A/C compressor must be adjusted if the value is greater than 0.47 in
. Apply a force of 22.5 lbf
.
To adjust, first release the tension pulley and then continue with Adjusting the belt tensioner, poly-V belt to power steering pump and A/C compressor