Fitting the Rear Brake Disc

Fig 1: Brake Calipers

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE: Exercise care when handling the new brake disc. Careless handling could result in damage, such as skewness.

Fit the new brake disc on the hub. Tighten the retaining bolt to 5 Nm .

Fit

the caliper holder assembly, including the caliper; use new bolts. Tighten to 55 Nm .
the brake pads, see Brake Pads Rear, Installing .

Check the parking brake as necessary, see Adjusting the Parking Brake .

Fit the wheel, see Wheels, Installing .