Activating the fuel gauge

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition on.

  Click the VCT2000 symbol to activate the fuel gauge test function. Check that the gauge is operating correctly. If the fuel gauge does not react to activation it indicates that the combined instrument panel is faulty. Try a new combined instrument panel.

  Other information 

  • For information about activating the fuel gauge, see Description of component/function activation
  • To access or replace the combined instrument panel, see Driver information module (DIM), installation/removal, component replacement
  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Did the fuel gauge function? 

• YES 

  FAULT NOT FOUND:  Troubleshooting has been completed.

• NO 

  Refer to Verification