Removing the SRS control module
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
The battery must not be connected when the control module is being removed or installed.
Remove:
- panels and cover. See: Removing panels and cover .
- the screws and connectors. See: Removing screws and connectors .
- 1 bracket screw and push the bracket and connectors to one side.
- 1 control module cover.
- 3 Torx 30 control module screws.
- 1 screw for the connector.
- lift up the control module.