Aligning the rear frame member
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Volvo have developed a traction mounting to facilitate aligning in the event of damage to the rear frame member damage on the 850 and S/V/C70. 999 7000
The traction mounting screws through the existing member which ensures a good mounting without the risk of deformation.
On five door models the side member extension must be removed in order to install the tool.
Left and right hand side
Volvo have developed a traction mounting to facilitate aligning in the event of damage to the rear frame member on the S60, V70 2000-, and S80.
999 7001
The traction mounting screws through the existing member which ensures a good mounting without the risk of deformation.