LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.4 58 >> Repair and Diagnosis >> External Pages >> Different car >> Section 129 (Engine Sensors & Switches - Removal & Installation (Coupe)) >> Engine Sensors & Switches >> Adapter Wiring Switch, Replacing >> Installing the Adapter Cable

Installing the Adapter Cable

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Adapter Cable & Tie Strap
GLL101309Courtesy of VOLVO CARS OF NORTH AMERICA.
NOTE: Ensure that the ends of the protective sheath on the adapter cable point downwards so that water does not gather in the protective sheath.

Install: 

Fig 2: Identifying Adapter Wiring For 6-Pin Connectors & Tie Strap
GLL104222Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the adapter wiring between the existing 6-pin connectors.

NOTE: Ensure that the ends of the protective sheath on the adapter cable point downwards so that water does not gather in the protective sheath.

Install: