Removing the power steering pump

Fig 1: Power Steering Pump

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the power steering pump's 3 x mounting screws through the pulley holes
• the connector with holder from the power steering pump.

Fig 2: Identifying Servo And Hoses

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the servo hoses and the engine coolant hoses from their holders/clips. Remove the tie strap for the servo hose by the suspension turret
• the expansion tank for the coolant and servo reservoirs from the mounting on the spring strut turret
• the connector and place the reservoirs on the engine.

Place the power steering pump on the engine.