Checking Remote Control Function. (1998): Verification: Notes

HINT: After carrying out the repair, check that the fault has been remedied as follows: 

Fig 1: Identifying Ignition On Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Connecting Control Unit

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Reconnect connectors, reinstall components.
• Ignition on
• Establish communication with the RTI system by reading off a value in the scrolling values. The display should fold up.
• Interrupt communication with RTI control module.
• Do not switch off ignition.

  Try to switch RTI system off with remote control.

  Fig 4: Identifying Scan Tool

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the remote control OK? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Fault-tracing information