Removing the right-hand level sensor

Fig 1: Identifying Tie Straps Around Protective Sheath, Hoses And Wiring

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the tie straps around the protective sheath, hoses and wiring
• the net protective sheath by carefully threading it off the hoses and wiring
• the tie strap under the protective sheath.

Fig 2: Level Sensor Retaining Clips

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the tie strap around the wiring above the pump
• the level sensor by pressing in the two clips and pulling upwards
• the thin pipe from the holder on the outside of the fuel tank unit
• the wiring from the holder in the fuel tank unit.