Volvo on-board diagnostic (OBD) system
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
With the VIDA PC it is possible to:
- read off and erase stored diagnostic trouble codes (DTCs)
- read off (and erase) alarm causes
- activate components or functions according to certain predetermined patterns
- continuously monitor the values and status of the input and output signals for the signals
- read off the control module identification
- reading off and programming the lock and alarm system.
The following conditions must be met before the Volvo on-board diagnostic (OBD) system is activated:
- the ignition must be on
- the battery voltage must be normal.