Reading Off Input And Output Signals
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Using this function the values and status of the control module input and output signals can be continuously read off.
The following parameters can be read off:
- Blower fan switch, position.
- Voltage generator (GEN) D+, status
- Left temperature selector, position
- left temperature control selector, position
- right temperature control selector, position
- REC buttons, status
- Damper Motor Position Sensor recirculation, position
- Damper Motor Position Sensor air distribution, position
- Voltage generator (GEN) D+, status
- damper motor position sensor temperature driver side, position
- damper motor position sensor temperature passenger side, position
- Sun intensity, value:
- passenger compartment temperature, value
- engine coolant temperature (ECT), value
- Outside temperature, value
- time since ignition on, value
- Vehicle speed signal (VSS), value
- fan passenger compartment temperature sensor, status
- communication power unit blower fan motor, status
- Control module control of blower fan, value
For further information about parameters, see Scrolling Values ECC .