Reading Off Programming Data
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
With this option it is possible to read programmed data and program in data. The aim with this programming is set up the additional heater function according to the customer's requirement.
NOTE:
If possible read off all data from the control module before replacing the control module. After replacement the current data is programmed into the new control module.
The programmable data is the start temperature setting. Start temperature refers to the highest outside temperature at which the additional heater may start.