Reading Off Input And Output Signals
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Using this function the values and status of the control module input and output signals can be continuously read off.
The following parameters can be read off:
- battery voltage, value
- outside temperature, value
- coolant temperature, value
- additional heater, status
- ignition supply, status
- generator (GEN) voltage D+, status
- the status displays whether or not the control module has registered too low power supply.
- fuel pump (FP), status
- glowplugs, status
- water pump, status
- combustion fan, value
- timer, status
- run time, value