LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Climate Units - Symptom Related Diagnostic Procedures (Coupe)) >> Reading Off Diagnostic Trouble Codes (DTCS), Climate Control (1998) >> Programming the ECC Control Module >> Connecting >> Connecting the Volvo Scan Tool (ST)

Connecting the Volvo Scan Tool (ST)

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

The Volvo Scan Tool (ST) must be connected to the VIDA PC and data link connector (DLC) in the passenger compartment.

Fig 1: Identifying Volvo Scan Tool
GLL100878Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the Volvo Scan Tool (ST) connected and switched on?