Checking Cables
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Check the ECC control module and combined instrument panel connectors for Contact Resistance And Oxidation .
Check signal cable between ECC control module #B1 and combined instrument panel # A6 for an open-circuit according to Open-Circuit, Permanent Faults , a short-circuit to ground according to Short-Circuit To Ground, Permanent Faults , and a short-circuit to supply voltage according to Short-Circuit To Supply Voltage. Permanent Faults .
Corrective action as necessary.
Other information:
To connect the breakout box, see Connection Of Breakout Box ECC .
To access the combined instrument panel, refer to Replacing The Combined Instrument Panel .
To remove the control module, refer to Replacing ECC Control Module .
- Continue
Refer to Verification