Verification, Continued
- Run the engine at 1500-1600 RPM.
- Turn the passenger compartment temperature selector to maximum cooling.
- Place air conditioning (A/C) switch to on.
- Air distribution selector to VENT.
- REC switch to on position.
- Set the blower fan switch to approximately 70% of full speed.
- Close the hood.
- Close doors and windows.
- Apply a thermometer in one of the central dashboard vents.
- Allow the system to stabilize itself for at least 8 minutes.
- Continue
Refer to Verification, Continued
- Run the engine at 1500-1600 RPM.
Check temperature in the central dashboard vents.
The read off temperature should be within the specified values.
A is outside temperature, measured in front of the car, and B is the temperature of expelled air in the central dashboard vents:
- If A is 20°C, B must be 5-8°C.
- If A is 30°C, B must be 5-8°C.
- If A is 40°C, B must be 8-12°C.
Is the temperature within the permitted values?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to Information
- Run the engine at 1500-1600 RPM.
- Turn the passenger compartment temperature selector to maximum cooling.
- Place air conditioning (A/C) switch to on.
- Air distribution selector to VENT.
- REC switch to on position.
- Set the blower fan switch to approximately 70% of full speed.
- Close the hood.
- Close doors and windows.
- Apply a thermometer in one of the central dashboard vents.
- Allow the system to stabilize itself for at least 8 minutes.
- Continue
Refer to Verification, Continued
- Run the engine at 1500-1600 RPM.
Check temperature in the central dashboard vents.
The read off temperature should be within the specified values.
A is outside temperature, measured in front of the car, and B is the temperature of expelled air in the central dashboard vents:
- If A is 20°C, B must be 5-8°C.
- If A is 30°C, B must be 5-8°C.
- If A is 40°C, B must be 8-12°C.
Is the temperature within the permitted values?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to Information