Installing the cable
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
- Check that the o-ring on the cable sleeve's guide sleeve is not damaged.
- Install the end of the cable in the grip on the expander.
- Squeeze the grip on the expander together around the cable using pliers.
- Securely press the guide sleeve in the end of the trailing arm.
- Install the cable to the trailing arm using a new clamp and rivet.
- Install the mounting screw in front of the rear wheel arch.