Installing brake disc and brake caliper

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Brake Caliper Mounting Bolt

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

Be careful when handling the new brake disc. Careless handling can cause damage (e.g. warping).

Install brake disc on hub in line with mark on hub.
Install locating pin and tighten to 8 Nm (6 ft.lb.).
Install brake caliper with new bolts. Tighten to 60 Nm (45 ft.lb.).