Locking Of Drive Shaft Nut And Wheel Hub: Notes
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
The use of protective equipment such as safety goggles is recommended.
If a drive shaft nut that requires staking needs to be re-tightened or removed, a new nut must be installed.
Tighten the new nut to the correct torque and lock as described below.