Installing the power steering pump

Fig 1: Power Steering Pump

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the power steering pump
• the 3 screws.
• the servo reservoir and the expansion tank in the mounting on the spring strut turret
• the tie strap around the servo hose at the spring strut turret
• the servo hose and the holder on the belt cover on the power steering pump
• the connector with holder on the power steering pump
• the engine coolant hose to the holder on the control module box
• The holder with the engine coolant hose to the servo hose

Install: 

• the auxiliaries belt. Use 9997109
• the dipstick tube
• the cold air inlet hose to the control module
• the air duct for the air cleaner (ACL) housing.

Move the ignition key to position 2.

Reconnect the battery lead to the battery negative terminal.