Installing Ignition Coils

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Ignition Coils, Connector And Mounting Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the new coil.

Align the coil and press it down. Install the screw. Tighten to 10 Nm .

Press in the connector until a clicking sound is heard.

Install the cover over the ignition coil.

Install the upper timing belt cover.

Fig 2: Identifying Charge Air Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the seals from the charge air pipe. Reinstall the charge air pipe over the engine.