Transferring the fuel tank pressure sensor

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fuel Tank Pressure Sensor

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the screw
Remove the clamp.
NOTE: Reuse the clamp.

Fig 2: Identifying Clamp Being Squeezed By Pipe Wrench

Courtesy of VOLVO CARS OF NORTH AMERICA.

Removing the clamp:

Squeeze the clamp using a pipe wrench. Hold in place
Pry apart using a small screwdriver
Disconnect the hose
Remove the cable harness
Install the pressure sensor on the new fuel tank, route the cabling as before.

Installing the clamp:

Squeeze the clamp using a pipe wrench until it locks.