Signal missing. Permanent fault: Verification: Verification

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

HINT: After carrying out the repair, check that the fault has been remedied as follows:

Fig 1: Identifying Ignition Switch ON Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Control Unit

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off.
EVAP canister shut-off valve and engine control module (ECM) connected.
Ignition on.

Fig 4: Identifying Scan Tool
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Select Volvo Scan Tool (ST) to activate EVAP canister shut-off valve.
- The EVAP canister shut-off valve clicks when it is activated.

Is the EVAP canister shut-off valve working?

OK
VERIFIED: Troubleshooting has been completed.
NOT OK
Refer to Information

HINT: After carrying out the repair, check that the fault has been remedied as follows:

Fig 1: Identifying Ignition Switch ON Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Control Unit

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off.
EVAP canister shut-off valve and engine control module (ECM) connected.
Ignition on.
Activate EVAP canister shut-off valve. Activating components/functions .

The EVAP canister shut-off valve clicks when it is activated.

Fig 4: Identifying Scan Tool
Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the EVAP canister shut-off valve working?

YES
VERIFIED: Troubleshooting has been completed.
NO
Refer to Information