Checking for open-circuit

Fig 1: Identifying Relay Base

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohms Display

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Check cable between fuel pump (FP) relay terminal 1 and fuse 2 for an open-circuit according to Open-circuit, permanent faults .

Fig 3: Checking for Open Circuit

Courtesy of VOLVO CARS OF NORTH AMERICA.

Go to "Continue" when the fault has been repaired. 

• Continue 

  Refer to Verify 

Fig 1: Identifying Fuel Pump Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohms Display

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Check cable between fuel pump (FP) terminal 2 and ground terminal (31/48) for an open-circuit according to Open-circuit, permanent faults

Fig 3: Checking for Open Circuit

Courtesy of VOLVO CARS OF NORTH AMERICA.

Go to "Continue" when the fault has been repaired. 

• Continue 

  Refer to Verify 

Fig 1: Identifying Relay Base

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohms Display

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Check cable between fuel pump (FP) relay terminal 3 and fuel pump (FP) terminal 1 for an open-circuit according to Open-circuit, permanent faults

Fig 3: Checking for Open Circuit

Courtesy of VOLVO CARS OF NORTH AMERICA.

Go to "Continue" when the fault has been repaired. 

• Continue 

  Refer to Verify