Fuel pump (FP)

WARNING: This page is about a different car, the 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Ignition Switch ON Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off.
Remove fuse 1.
Ignition on.
- Lightly squeeze the hose connected to the fuel pressure regulator and reinstall fuse 1.
- Check that the fuel pump works for a few seconds after the fuse is refitted. When the fuel pump (FP) is operating the fuel hose connected to the fuel pressure regulator pulses.
- NOTE:
  If the pump does not work at the first attempt, repeat the process a couple of times to verify that the pump does not work.
Fig 2: Squeezing Fuel Pressure Regulator Hose
Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the fuel pump (FP) working?

YES
Refer to Information
NO
Refer to Starting fuel pump (FP)