Start fuel pump

WARNING: This page is about a different car, the 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Ignition Switch ON Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Connect jumper lead across relay base terminals 1 and 3.

Fig 2: Identifying Fuel Pump Relay Terminals
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Switch on ignition.

Fuel pump should run.

Continue
Refer to Checking fuel filter

Fig 1: Identifying Ignition Switch ON Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Connect jumper lead across relay base terminals 1 and 3.

Fig 2: Identifying Fuel Pump Relay Terminals
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Switch on ignition.

Fuel pump should run.

Continue
Refer to Checking pressure regulator, pressure reduction

Fig 1: Identifying Ignition Switch ON Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Connect jumper lead across relay base terminals 1 and 3.

Fig 2: Identifying Fuel Pump Relay Terminals
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Switch on ignition.

Fuel pump should run.

Continue
Refer to Checking pressure regulator, pressure increase

Fig 1: Identifying Ignition Switch ON Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Connect jumper lead across relay base terminals 1 and 3.

Fig 2: Identifying Fuel Pump Relay Terminals
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Switch on ignition.

Fuel pump should run.

Continue
Refer to Checking residual pressure