Installing the fan shroud

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Cable Harness, Tie Straps And Harness Holder

Courtesy of VOLVO CARS OF NORTH AMERICA.

Carefully lower the fan shroud and align with the holders. Route the cable harness behind the holder (3).

Tighten both the mounting screws

Press the hose down from the expansion tank into the holder on the fan shroud

Secure the cable harness by the fan shroud using tie straps (1) and (2). See Fig 1.

Install the evaporative emission system (EVAP) valve.

Connect the engine cooling fan (FC) connectors.