Install turbocharger connectors

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

For tightening torques, see: Tightening torque.

NOTE:

To ensure that there is no exhaust leakage, see: Flanged joint, assembling.

Fig 1: Locating Turbocharger Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

new studs (if any are missing) are tightened with 20 Nm .
the turbo unit.
hoses acc. to marking.
the exhaust manifold's both upper nuts, and tighten slightly.

Raise the car.