Reinstall camshaft components

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Camshaft Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Reinstall:

The front camshaft belt cover.
Tighten to 12 Nm (8.8 lb.ft.) .
The upper camshaft cover.
Tighten to 8 Nm (6 lb.ft.) .
Install the auxiliaries belt.
The servo reservoir.
Wipe clean.

Check the fluid level. Top up if necessary.
The expansion tank.
NOTE:
Ensure that the hoses are correctly positioned.
Wipe clean and check the engine compartment.
The cover in the fender liner.
The front wheel.