Transferring components when replacing the intake manifold

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

For tightening torques, see: Tightening torque.

NOTE:

To ensure that there is no exhaust leakage, see: Flanged joint, assembling.

Fig 1: Identifying Electronic Throttle Module, Intake Manifold And Gasket

Courtesy of VOLVO CARS OF NORTH AMERICA.

Transfer

The electronic throttle body
Use a new gasket .

Tighten to 10 Nm .