Replacement of intake manifold/gasket: Finishing

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Camshaft Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install

the fuel distribution pipe.
Press together the quick-coupling.

Use new screws .

Tighten to 10 Nm .
connectors for the injector valves and the cover plate.
the vacuum hoses according to the earlier markings
the plastic charge-air pipe and the hose for the charge-air cooler.
connectors for sensors in the plastic charge-air pipe.
air baffle from the control module box at the electric cooling fan shroud.
the dip stick in the intake manifold.