LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Engine - Removal, Replacement And Installation (Coupe)) >> Replacing Cylinder Head/Gasket (B5234T3; B5254T; 1998-1999) >> Cylinder head/gasket, replacing >> Remove the holding tools

Remove the holding tools

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Adjustment Tool And Camshaft Adjustment Tool
GLL125700Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove crankshaft adjustment tool ( 9995451 ) for the crankshaft and install the blind cover plug

Install the starter motor.

Remove the camshaft adjustment tool ( 9995452 ).



Fig 1: Identifying Adjustment Tool And Camshaft Adjustment Tool
GLL125700Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove crankshaft adjustment tool ( 9995451 ) for the crankshaft and install the blind cover plug

Install the starter motor.

Remove the camshaft adjustment tool ( 9995452 ).