Install the upper cylinder head half

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Press Tool

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the upper half.

Tighten it down against the cylinder head with press tool 9995454 (2 pcs).

Install the upper section from the inside and outside. Tighten to 17 Nm .

Remove the camshaft adjustment tool ( 9995453 ) and tool ( 9995454 )

Fig 1: Identifying Press Tool

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the upper half.

Tighten it down against the cylinder head with press tool 9995454 (2 pcs).

Install the upper section from the inside and outside. Tighten to 17 Nm .

Remove the camshaft adjustment tool ( 9995453 ) and tool ( 9995454 )