Install the rear camshaft seal

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Camshaft Seal

GLL108704

Courtesy of VOLVO CARS OF NORTH AMERICA.

4 valve engines:

Use drift 9995450 .

2 valve engines:

Use drift 9995509 .

Grease the seal.

Press in the seal.

HINT: The seal is normally positioned at the same level as the internally bevelled edge. If the shaft journal is showing signs of wear, the seal can be pressed in a further 2 mm by turning the drift socket.

Fig 1: Identifying Rear Camshaft Seal

GLL108704

Courtesy of VOLVO CARS OF NORTH AMERICA.

4 valve engines:

Use drift 9995450 .

2 valve engines:

Use drift 9995509 .

Grease the seal.

Press in the seal.

HINT: The seal is normally positioned at the same level as the internally bevelled edge. If the shaft journal is showing signs of wear, the seal can be pressed in a further 2 mm by turning the drift socket.