Apply liquid gasket

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Camshaft Cover With Holders And Tool

Courtesy of VOLVO CARS OF NORTH AMERICA.

Roll on gasket compound:

Apply liquid gasket, part no.: 1161059 , on the camshaft cover.
Use roller 9511205 .

Make sure that gasket compound does not end up in the oil channels.

A thin layer is enough to seal.
Oil in the bearing positions for the camshafts in the camshaft cover.
Install the camshafts.
Check the markings.
Fixate the camshafts at the front with holders 9995453 and at the trailing edge with tool 9995452 .