Remove intake manifold

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Intake Manifold

Courtesy of VOLVO CARS OF NORTH AMERICA.

Intake manifold three upper bolts.
Dipstick and mounting from intake manifold.
Remove the lower intake manifold bolts.
EGR valve pipe coupling.
Intake manifold support bracket screw.
Intake manifold, by lifting it approx.20 mm (0.787 in) to free it from the engine.
Crankcase ventilation hose from intake manifold at servo pump (only 1995 year model).
Intake manifold gasket.

Clean gasket faces on cylinder head and intake manifold.