Install intake manifold
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
- New gasket and the four lower intake manifold bolts.
- 1995 year model: Crankcase ventilation hose to intake manifold at servo pump.
- All: Intake manifold.
NOTE:
Do not pinch the crankcase ventilation hose between the cylinder head and intake manifold.
- Reinstall the EGR valve on the pipe. Tighten the EGR valve coupling to 50 Nm (37 ft lbs) .
- Upper intake manifold screws and tighten all bolts to 20 Nm (14.8 ft lbs) .
- Intake manifold support bracket screw.
- Dipstick.