Removing the intake manifold

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Intake Manifold

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove

the EVAP hose from the intake manifold
the by-pass valve vacuum hose
the upper row of screws holding the intake manifold to the cylinder head. Slacken off the lower screws
the pipe screw for the crankcase ventilation from the underside of the intake manifold.

Disconnect the connector for the electronic throttle module.

Lift up and remove the intake manifold.

NOTE:

Make sure that the fuel delivery pipe is not damaged.